DUAL XDM17BT INSTALLATION & OWNER'S MANUAL Pdf Download (2024)

FAQs

What is the password for dual xdm17bt? ›

The Bluetooth passcode is "1234”.

Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located on the front panel. With the unit on, press DISP to display clock time. Press and hold DISP until the hours begins to flash, then release.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”

The default password of H. view poe camera is 12345.

Dual iPlug for Android is an app for controlling your marine stereo via Bluetooth. This app can operate as a remote controller for certain marine stereo models.

Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google Assistant™ on your smartphone.

To get audio to multiple speakers, use an app such as AmpMe, Bose Connect, or a few from Ultimate Ears, as well as Bluetooth 5, which send audio to two devices at once. Instructions in this article apply to Bluetooth speakers connected to Android, Amazon Echo, or Google Home devices.

The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000". Note: The head unit can be in any mode of operation when pairing is performed.

Why is my Bluetooth radio not pairing? ›

If your Bluetooth devices won't connect, it's likely because the devices are out of range, or aren't in pairing mode. If you're having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet "forget" the connection.

1. Go to the Settings menu and enter the Wi-Fi menu. 2. Select DualCast-XXXXXX and enter the password 12345678 to connect your iPhone to DualCast™ Dongle via Wi-Fi.

Tap on it to pair your phone/tablet with OBD2 adapter. Adapter would ask you for PIN-code. If you don't know PIN code, check your adapter documentation. Usually it's “1234”, “0000”, “7890” or “1111”.

* 3051 - This is the security code which is printed in the manual of many Kenwood models. * 1234 - This is a security code commonly chosen by Kenwood owners. Entering Your Kenwood Security Code, If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The default login username and password are both “admin”.